Get free quotes

Free calculator, nothing to sign up for

How many nutec boards do the walls take?

Give the size of the building or the wall area, pick a sheet size and an allowance for cuts, and this counts the fibre cement sheets for the outside, an inside lining and a ceiling, with a price where a South African list publishes one.

A neat stack of grey fibre cement boards on timber bearers at a timber yard, with a tape measure and a scoring knife on the top sheet
SheetsWall area to board count
With cuts and wasteKit NUT-BOA-772
Board countWall area to fibre cement sheets
Runs in
your browser
Sent
nothing

1The building

2The sheets

Also board
Outside wall area
-
Sheets, outside
-
Sheets, inside lining
-
Sheets, ceiling
-
Sheets in all
-
Upright joints to seal or cover
-
Sheets cost
-

Sources for this price

    Fibre cement boards, which most people call nutec boards after one maker's product, are sold by the sheet, so the question is how many sheets cover your walls. This calculator takes the outside wall area from the size of the building, the same way the quote form does, divides it by the area of one sheet and adds an allowance for cuts and breakage. Tick the inside lining or a ceiling and it counts those too. Where a South African list publishes a price for the sheet, it prices the count; otherwise the sheet is quoted per job.

    How the count works

    The wall area is the length of wall all round x the wall height, plus the triangles under the roof, less the doors and windows. Divide it by the area of one sheet (2.88 m² for 1.2 x 2.4 m, 3.6 m² for 1.2 x 3.0 m), add the waste allowance and round up. With the sheets standing upright, 1.2 m wide, a joint falls about every 1.2 m along the walls, and each joint has to be sealed or covered with a strip as the maker's instructions say. If the walls are taller than the sheet, there is a joint across the wall as well. See nutec boards for thicknesses and uses.

    Prices we found

    Published South African prices in November 2026 ran from about R185 to R281 for a 4 mm sheet of 1.2 x 2.4 m, about R401 for 9 mm at 1.2 x 2.4 m and about R602 for 9 mm at 1.2 x 3.0 m (both including VAT), and about R499 for a 6 mm ceiling board of 1.2 x 3.0 m. Thinner boards are usually for ceilings and inside walls, thicker ones for outside walls; ask the supplier which thickness your building needs. Screws, joint strips, sealant and delivery are extra and not priced here.

    Cutting and fixing safely

    Fibre cement dust contains silica, so cut outdoors, wear a dust mask and follow the maker's instructions for the blade or scoring knife. Fix the sheets with the screws or nails and the spacing the maker gives, and leave the gaps at the joints that the boards need to move. Then seal or paint them with a paint made for fibre cement: the paint calculator works out the litres. For a whole building, see nutec wendy houses.

    Sources

    Prices were read on these pages in November 2026. We only use South African figures whose source we opened; anything without a fair published price is left out and quoted per job.

    Frequently asked questions

    How many nutec boards for a 3 x 3 m wendy?
    With 2.1 m walls, a gable roof, one door and one window, the outside walls come to about 25 m². At 1.2 x 2.4 m sheets and 10% extra that is about 10 sheets for the outside; an inside lining doubles it.
    Why do you not count the screws?
    The number and spacing of screws depend on the sheet, the frame and the maker's instructions, so we leave them to the supplier rather than guess.
    Can I use the same board for the ceiling?
    Thinner boards are often used for ceilings, so ask the supplier. The calculator counts the ceiling in the sheet you pick, which you can change.
    Do you sell nutec boards?
    No. We pass your list to board and timber suppliers in your area, who quote you directly. See about us.

    More calculators and tools

    Free quote request, no obligation

    Request nutec boards quotes

    Fill in the build sheet the way a builder would on site: the size of the building, the wall height, the roof and the doors and windows, or simply how many boards, planks, litres or months you need. Builders and suppliers in your area quote you directly.

    Build sheetNutec Boards
    Sheet
    NUT-BOA-910
    Date
    2026-11-21

    1The job

    2How many (optional, it helps the quote)

    Your ordernot to scale

    -
    -
    -
    -
    -
    -
    Estimate
    -

    Geometry for the request, not a builder's measure.

    3Where you are now

    4Your list (optional)

    1. 01
    2. 02
    Up to 12 lines: buildings, boards, planks or services.
    Needs and options

    5Your details

    Free and no obligation. By sending you agree that we may share your request with suitable builders, suppliers and service providers. See our privacy policy.

    Get free wendy house quotes